Gourmet Guru Grill Guru Vintage Table Скачать руководство пользователя страница 5

Страница: 5 / 6

Parts List

Ite

Part Number

Description

705-1013-00

Grill Pedestal

726-9017-00

Pedestal Bracket

8-18 x ¾”

Phillips Pan Head Screw

739-9125-00

Pedestal Ash Shield

3. Install the two grill pedestal brackets (2) on either side of the grill pedestal

(1).

4. Turn the table over on its legs and set the grill pedestal between the boards

on the shelf so that it is lined up with the hole for the grill in the table top.

5. The ash shield sits on top of the pedestal with the logo facing forward; see

picture below. Your table assembly should look similar to the illustration
below.

Содержание Guru Vintage Table

Страница 1: ...Guru s Vintage Table Assembly Instructions ...

Страница 2: ...Hardware List Quantity Description 4 20 x 2 5 Carriage Bolt 12 20 x 3 Carriage Bolt 16 20 Hex Nuts 16 Flat Washer 64 8 x Phillips Screw 5 8 32 Phillips Machine Screw 5 8 32 Hex Nut ...

Страница 3: ... carriage bolt and side brace strip 11 through the single hole on outer ends Install x 2 carriage bolt with front brace strip 8 through the double holes on front and back sides of the legs Secure all bolts with flat washers and Hex nuts Do not tighten hardware at this time The assembly should look like the illustration below ...

Страница 4: ... top facing down between legs as shown above until holes line up Secure the shelf to the legs using four x 3 carriage bolts flat washers and hex nuts You can tighten all hardware at this time The assembly should look like the illustration below ...