34
EN -
NOTE:
before cleaning the mixing bowl
5
in the dishwasher, always remove the
blade
29
.
Before every cleaning, remove the blade seal
28
from the rest of the blade
29
.
•
Place plastic accessories on the top rack of the dishwasher to avoid deformation
from the hot water and pressure.
29
28
5
13.3 Cleaning the accessories
1.
Rinse the mixing bowl
5
with warm water and dump the water.
2.
Remove the blade
29
(see “Using and removing the blade” on page 23) and take
the seal
28
off (see “Cleaning, checking and replacing seals” on page 34).
3. Clean all accessories by hand in a sink with water or in the dishwasher.
4. When cleaning by hand, rinse all parts with clean water.
5. Allow the parts to dry completely before using them again.
6. Before using the appliance again, reinsert the blade
29
.
13.4 Cleaning, checking and replacing seals
Remove seals
28
,
33
and
4
for cleaning and check them for damage. Pay attention to
changes (e.g. porous material or tears).
- The removed seals
28
,
33
and
4
can be cleaned in the dishwasher.
- Damaged seals
28
,
33
and
4
must be replaced with new ones.
WARNING!
•
Prior to the next use, damaged seals 28, 33 and 4 must be inserted again or
replaced with new ones. The operation without seals 28, 33 and 4 in place is not
permitted.
Blade 29
1. Remove the blade
29
from the mixing bowl
5
(see “Using and removing the blade”
on page 23).
2. Pull seal
28
off the blade
29
.
3. Insert the cleaned seal or a new one.
4. Before using the appliance again, reinsert the blade
29
.
Deep steaming tray 3
1. Pull seal
4
off the underside of the deep steaming tray
3
.
2. Insert the cleaned seal
4
or a new one in the deep steaming tray
3
. Ensure that the
seal is in continuous contact with the surface without any damage.
