Separator specifications
14
Working principle
Drawing:
Cleanflow SECF
•
The SECF manual cleaning Cleanflow magnet is designed to separate Fe (ferromagnetic*) parts out
of a product stream falling through the Cleanflow magnet.
•
In the product channel
1 or more magnet bar layers
are placed. When more layers, the layers are
placed over another in a way that the material stream passes the bars like in a cascade. The product
stream will therefore always pass minimum 1 magnet bar very closely.
•
The Fe particles in the product stream will be attracted by the magnets and will "cling" onto the
tubes, while the cleaned material streams further.
•
The Fe parts will stay on the tubes until it will be removed manually. This can be done by taking out
the magnet unit (
Fe out
) and executing a cleaning / Fe disposal action.
Unfortunately, product that gets stuck in-between and under separated Fe parts will fall off with it while
cleaning the magnet bars of Fe parts, and thus cause some "material loss".
Before every cleaning / Fe disposal cycle, the product stream has to be interrupted.
For an extra description of the cleaning / Fe disposal process:
Also see chapter Magnet bar cleaning / Fe disposal.
Magnet bar
Product stream IN
Product stream OUT
Fe OUT