Device Description HG G-7335xZA | English, Revision 05 | Date: 19.02.2020
14
Chapter 4 – Mounting
4
Mounting
4.1 Casing Dimensions
Figure 1
Casing dimensions interpreter HG G-73350/HG G-73351
4.2 Connectors
All connectors are M12 panel plugs/jacks, except for the B-coded Profibus connec
-
tors they are A-coded. The casings of all connectors are connected to the device
GND (Pin 5 in Table 6 on page 16). Notes on matching connection cables are given
in section 3.3 on page 12.
4.2.1 Antenna Sockets on the Interpreter
The steering antennas are connected via a 1:1 cable to the corresponding 4-pin A-
coded M12 panel jack. The two panel jacks are shown in Figure 1, labeled ANT1 and
ANT2. They are allocated as follows:
Table 3
Pin allocation antenna sockets, connectors ANT1 and ANT2
ANT1 / ANT2 (female) Pin
Signal
1
+24 V
2
GND
3
Usum
4
Udiff
Casing
GND
d
ril
lh
ol
e
fo
r
m
ou
nt
in
g
