![background image](http://html1.mh-extra.com/html/gotrack-tracking/vt390/vt390_user-manual_2247480018.webp)
GPS
Tracker
User
Manual
Set Time Interval for
Sending GPRS Packet
W******,014,XXXXX
W******,044,XXXXX
014 for ACC OFF
044 for ACC ON
XXXXX should be in five digitals
and in
unit of 10 seconds.
XXXXX=00000,to disable this
function;
XXXXX=00001~65535,
time
interval for sending GPRS
packet and in unit of 10
seconds.
Output Control
W******,020,P,F
P =1, Out1
=2, Out2
=3, Out3
=4, Out4
=5, Out5
F =0, to disable the output
=1, to enable the output
Output Control (Safe
mode)
This function is achievable
when the speed is below
10km/h and GPS is
available.
W******,120,ABCDE
ABCDE represents Out1, Out2,
Out3,
Out4, Out5 respectively.
If A or B or C or D or E,
=0, to disable the output
=1, to enable the output
=2, to remain previous status
Set power saving mode
when VT390 is still
(In power saving mode, GPS
stops working. GSM enters
standby mode and stop sending
out message until it is activated
by an SMS or an incoming call)
W******,026,XX
XX=00, to disable this function
XX=01~99, to set this function. It
is in
unit of minute.
Example:
If XX=10, VT390 will enter
power
saving mode in 10 minutes after
it is
immobile.
Set phone number for
wiretapping
W******,030,T
T is the telephone number for
wiretapping and max. 16 digits
Set time zone difference
W******,032,T
T=0, to disable this function
T=[1, 65535] to set time
difference in
minutes to GMT.
Default value is GMT
+, not necessary for those
ahead of
GMT. For example, either +120
or 120
- 18 -
Содержание VT390
Страница 14: ...GPS Tracker User Manual 14...