USER MANUAL - EN
SPECIFICATION
- LCD display
- capacity: 40kg
- division: 20kg/5g, 40kg/10g
- unit: g, kg, oz, lb,
- tare function
- "Hold" function - blocking the measurement result
- calibration function
- automatic switch off
- overload indicator
- low battery indicator
- power: battery 1xCR2032
INSTALL BATTERY
Remove the plastic strip placed under the battery compartment lid to activate the
batteries. Put the lid back.
POWER ON/OFF
Hold the scale upright. Press power on button. When the display shows 0.00, it is ready to
use. The scale automatically shuts off a few seconds after you finish weighing. If you like
to turn it off manually, press the „power on” button until the scale is off.
WEIGHING STEPS
1. Hang the goods at the belt.
2. Be careful not to touch the metal attachment underneath the scale since it may cause
misleading weighing result.
3. When the weight is established the data will be locked and the LCD will display HOLD.
4. If you press the power button the data will be locked and you can add further goods.
5. If the scale is overloaded, it will show „Err”. Remove the weight from the scale to avoid
damaging the scale.
TARE FUNCTION
If you use a container, please hang the container at the belt, press the power on button to
reset to 0.00 and then put the goods you want to weight into the container. This way you
get the net weight of the goods.
WEIGHT UNIT EXCHANGE
Press the „power on” button until the LCD displays „8888” then press „power on” button to
choose unit: g, kg, oz or lb.
- PL
NOTE
- Hold the handle when weighting.
- Do not impact violently or press hard on the scale
- Use a soft cloth to wipe the scale. Do not use chemical detergent.
- When the display shows , it is time to replace battery. If you are not going to use
1
Содержание GWB-100
Страница 1: ...GWB 100...
