gosund WP3, Руководство пользователя

Страница: 1 / 36

Install the “Go Smart” App
PS: You can also add this smart plug to
smart life app directly if you already have
it on your phone, it is compatible and
works the same way.
2. Register an account and memories
the password, enter your email address
or your phone number, then obtain
verification code to complete the registry.
Connect with Your Cellphone
< Settings Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
Default 2.4G Wifi Names
Gosund_xxxx_2.4G
Gosund_xxxx_5G
Gosmart_xxxx_
Gosmart_xxxx_5G
2. If you are using a dual Wi-Fi router
and it broadcast 2 Wi-Fi signals, make
sure that your phone was connected
3. If you are using a dual Wi-Fi router
but it broadcast only 1 Wi-Fi signal, you
will have to manage your Wi-Fi router
and change the settings to have
2.4GHz Wi-Fi.
Cucumber Town
DEVICES
NETWORKS
CLIENTS
ZONES
POLICIES
TRIGGERS
Advanced Settings
Client Filtering
Any authorised client can join the network
Available if your access points have two radios.
Off
Band Selection
Dual 2.4Ghz 5Ghz
A: For Easy Mode Connection- Blue
ndicator Light Blink Rapidly ( Twice a
second ).
---> Confirm the light status on your
plug and follow the App guide.
( If you don’t see blue light quickly
blinking,press On/Off button to reset.)
---> Set a unique name for this smart
plug, choose the room location.
B: AP Mode(Indicator light blinks once
every 2 seconds ) If the Easy mode
connection failed, please remove and
install the smart plug into your power
outlet again. When you make sure the
indicator light is quickly blink again for
Easy mode, hold the power button for
about 7seconds to plug to AP mode.
Once you see the indicator light slowly
blink(every 7 seconds ), you can start to
try the AP mode connection.
---> First go back to the Add Device “+”
interface, choose the AP Mode on the
upper right corner.
Add Device
Add Device
Ap Mode
-->Long press on/off button until the
indicator light flashes slowly;
-->Make sure the indicator light is
flashing slowly and confirm it in App;
-->Choose your 2.4G Wi-Fi and enter
the password and confirm it in App;
WLAN
SmartLife-25A2
Unsecured network
CHOOSE A NETWORK...
i
Setting WLAN
Getting to Know Go Smart App Note: edit the default names in this
interface, for better management.
Set schedule
Set device names
Set timer
Create Scenes/Groups
You can create certain scenes and
groups on Go Smart App, it allows you
to control different smart devices in
different rooms at the same time.
My Home Smart Me
Smart
No Scenes, please add.
Add smart
Requirements: 2.4GHz Wi-Fi condition
at home
Alan
Overcast
69.8°F
Outdoor Temp
Excellent
Outdoor PM2.5
Excellent
Outdoor AQI
Cancel
Add Device
Add Manually Search Device
Electrical
Smart
Lighting
Home
Appliance...
Home
Appliance...
Wall
Switch
Wall
Switch
(bluetooth)
Wall
Switch
(ZigBee)
Electrical
Outlet
Electrical
Outlet
(bluetooth)
Electrical
Outlet
(ZigBee)
View Help
Confirm indicator rapidly blink
Device Sharing
If you want to give others the permission
to control your smart plug, you can
authorize that by device sharing function.
How To Connect with Amazon
Alexa
Requirements:
1.Amazon Alexa Device and Alexa App
2.The Smart Plug connected with Go
Smart App
3.Go Smart App user ID and password.
Open Alexa app and choose Skills &
Games
--> Search for Go Smart
-->ENABLE TO USE
-->Enter the Go Smart account
Add Device
Lists
Reminders & Alarms
Contacts
Routines
Things to Try
Skills & Games
Done skills-store.amazon.com
Go Smart has been successfully
Linked.
What to do next:
Close this window to discover smart-home
devices you can with Alexa.
amazon alexa
TuyaSmart
Smart Life
GO SMART
Done aleax.gosund.com
Link Account
The following Apps all support skill.Please
select an App an App to log in
Link NOW
First you need to set exact name for the
plug on Go Smart app. If not, Alexa may
tells you: “Sorry, I can’t find the device
Add Go Smart as a “Skill” for Alexa
How to ask Alexa to turn on/off Smart
Plug
Things you can do with Alexa
* Remote Control the smart plug via
Alexa App.
* Add the smart plug to certain groups
on Alexa App For other questions about
Alexa, please find out with Amazon
Alexa support page, or contact us for
help directly by email.
Tips for using Alexa Voice Control
Please make sure the device name you
set for the smart plug is unique and
recognizable for Alexa voice assistant.
You should make sure all the smart
devices names at your home are non-
repetitive and recognizable for Alexa.
How To Connect with Google
Home
After you connected the smart plugs
with go smart app successfully, you can
start to link them to
Google Home app:
-->Search go smart
-->Enter your go smart account
-->Authorize to use.
Add Settings
Add and manage
Add to home
Set up device
Invite home member
Create speaker group
Create new home
Trouble Shooting
A: * You should try both Easy Mode and
AP Mode, read page 5-page 11, make
sure to follow the guide and try again.
A: * Make sure you set up smart plug
successfully on Go Smart app, and
they are working fine.
Q: Do I need to set up the device
again if I changed my router?
Q: Why can’t I voice control it with my
Alexa/Google?
Q: Why my phone connection failed ?
X Go smart
Go smart
Add new
Manage accounts
Go smart
Linked servlces
1 device
Linked to you
1 device not in a home
Mini Smart Plug
off on
Now click the device that “Linked to you”
or open “Works with Google” again to
manage your linked devices, follow the
steps below and set up the device
Devices settings
General
Name
Home
Unlink Go Smart
Mini Smart Plug
Add to a home
Linked to you
Mini Smart Plug
off
Add to a room
Phone Number/Email Address
Type your password here
Link Now
Forgot Password Help
+1
GO SMART
ENABLE TO USE
Account linking required
Rated Guidance Suggested
3
Go Smart
Shenzhen Gosund Technology Co., Ltd
Google will able to ：
Recelve your public profile
Control your devices over internet
Authorize
New devices
Works with Google
Set up new devices
Google Home devices,Chromecast,and
Made for Google devices like C by GE Smart
Have something already set up?
Link your smart home services like Philips
Hue and TP-Link.
Add Device
Kitchen Plug
Living Room
Bedroom Secon...droom
Dining Room Study Room Kitchen
Go Smart App Alexa App
PLUGS
ALL ON ALL OFF
OFF
Bathroom Switch
New Device
OFF
Livingroom Plug
New Device
My Home Smart Me
Bathroom Switch
Already On
Livingroom Plug
Already On
Study Room Bathroom Outdoor
Execute the following actions
Babyroom Plug
Switch1: OFF
Livingroom Plug
Bathroom Switch
Show on home page
Smart Settings Save
Switch1: OFF
Switch1: OFF
-->Tap “Connect now” and choose
Wi-Fi hotspot named “SmartLife-xxx”,
then go back to Go Smart application;
WP3 Mini Smart Plug Instruction
What’s in the Box
WP3 Mini Smart Plug
User Manual
At a Glance
Parameters
Rated Voltage: 120V
Rated Current: 10 A (Max)
AC Frequency: 60Hz
Working Temp: -10 ~60 ℃
Wi-Fi Frequency: 2.4 GHz
Maximum Power Output: 1200W
1. Flame Resistant Material
2. Socket Panel 3. ON/OFF Button
4. Indicator Light 5. Power Plug
---> Confirm that the smart plug is well
installed
---> Open Go Smart app
---> Choose the “+” symbol,
---> “Electrical Outlet”
-->Wait till successful configuration and
then tap “Completed”.
* Remove&Install the smart plug to start
again, see what happens. Contact the
after sales service for further help if you
still have problems with the connection
after following the steps above.
* Make sure your Alexa/Google device
is working fine.
1. Search for Go Smart App on App
store/Google Play Store, or just scan the
QR code below to download.(For iPhone,
you can use build-in camera to scan the
QR code. For Android, you may need
barcode scanner to do that.
Go to the Go Smart app
-->Choose the device you want to share
-->Choose Edit Button -->Choose
shared devices
-->Add sharing-->Enter his/her Go
Smart account
-->Search and complete.
-->Authorize to use
-->Choose Go Smart. And then, the
devices you added on will sync to Alexa
App. You can also ask Alexa to discover
new devices for you in this moment.
Open Google Home app and find “Set
up device”
-->Click “Works with Google”
If you still having trouble to voice control
our smart plug after followed all
A: Yes! you must set up the smart plug
again if there is any change of the
current Wi-Fi status, either you changed
your router or your moved the device to
a new house. However, you don’t need
to worry if you are just moving it inside
your room, with the same Wi-Fi.
Q: Why does it turns on/off or comes
offline surprisingly ?
A: Check your Wi-Fi status and make
sure the electricity is fine.
Check if you’ve set timer for it.
If everything looks alright, just reset the
smart plug on your app again and see
what happens.
Email to after-sales services if this
problem still exists.
Safety Information
This device is for Indoor&Dry condition
use only. Make sure the plug electricity
is correct for the appliances that you
attempt to use with. Do not try to
Warranty
90 days money-back guarantee:
If you’re not satisfied with this purchase,
you can choose to refund this order
within 90 days.
Contact Us
For any inquiries or comments
concerning our products, please send
email to:
Manufacturer:
Shenzhen Gosund Technology Co., Ltd
Website: www. gosund. com
Email Support:
Friendly reminder: Different App versions
may lead to differences in the interfaces,
but the description of the function
should be the same.
service@gosund.com.
service@gosund.com.
12 months limited warranty:
* Covers unartificial failures and
defections on this device.
Risk of Damage: Not suitable for
appliances that exceed 16A Current,
be careful. Do not cover if the device
was found artificial disassembled.
* Check the device names that you set
for this smart plug, it should be non-
repetitive and recognizable for voice
assistant, Also, please make sure your
native language is available for Alexa.
Keep away from hot, humidity and other
extreme environment. This device meets
UL94 V-0 flammability standard.
-1- -2-
-10- -11- -12- -13- -14- -15- -16- -17- -18-
-19- -20- -21- -22- -23- -24- -25- -26- -27-
-28- -29- -30- -31- -32- -33- -34- -35- -36-
-3- -4- -5- -6- -7- -8- -9-
Go Smart
Socket is on
bedroom light
Switch Timer Schedule
Indicator Light Status
Blue light blinks every 0.5 second-Easy
Mode connection
Blue light blinks every 2 seconds- AP
Mode connection
Red light- Power is ON
No light- Power is OFF
NOTE: Press the ON/OFF button to
restore the factory setting if you want to
erase the plug’s current settings.
Model Number: WP3
Please confirm the App icon before
downloading.)
with the 2.4GHz Wi-Fi signal, it should
be the Wi-Fi signal that next to “_5G” .
named xxx...” You can say to Alexa
“Alexa, turn on/off bathroom plug”, this
command will help you to do the work.
* Voice Control the smart plug
Voice assistant system needs the exact
command to do the work.
After that you will see the smart plug in
the home page of Google Home as
“Linked to you”,but you still haven’t set
the device name and assign a home or
a room for it.
names, rooms and home for the smart
plug, you won’t be able to voice control
it before you complete that.
* Confirm your home Wi-Fi is 2.4GHz
and you entered the correct password
during the connection.
* Make sure you put correct account
when you link Go Smart as a skill on
Alexa/Google App, and you can find it
on your skills.
instructions, do not hesitate to contact
us for help.
disassemble this device by yourself, be
aware of product damage and safety
risks.
* Device was used in proper technical
working condition.
For 2.4Ghz Wi-Fi You’ll Need to Know:
1.If you only have 5GHz Wi-Fi router,you
will not be able to complete the connection.