Installation Guide
HPX-C5400-CN+A
Hydraport Component Video + Stereo UPX Module
Overview
The HPX-C5400-CN+A Component Video + Stereo UPX Module (FG552-52-BL-K) is
designed to be used in conjunction with the HPX-1600 Hydraport Base Assembly. See
specifications for module requirements. For more information on the HPX-1600, refer
to www.amx.com.
The HPX-C5400-CN+A Component Video + Stereo UPX Module provides user-
accessible RGBHV (VGA) Video and Stereo connections on the face of the Hydraport
system. The HPX-C5400-CN+A Component Video + Stereo UPX Module provides
connection from the user's source equipment to a remote client such as projector,
monitor, display or stereo sound system over CAT 5 cable using AMX's proprietary
UPX system.
Product Specifications
Installation
Attention!
Only a professional, AMX-qualified installer should
perform this installation. Installation must conform to all local codes.
This product may not be installed by the end-user.
Tools Required
•
Wire cutting pliers
•
Phillips Screw Driver (to access Hydraport Base Assembly)
CAUTION!
Ensure that the AC Power cord is disconnected from IEC
C-14 power inlet connector on the Hydraport Base Assembly prior to
disassembly of the Hydraport Base assembly or installation of the
HPX-C5400-CN+A Module (see FIG. 2).
Step 1 - Backside Termination
Before installing the module into the Hydraport Base Assembly, the backside
terminations of the module must be completed.
This backside termination involves simply plugging in the CAT 5 cable into the RJ45
receptacle on the back of the HPX-C5400-CN+A Module (FIG. 3).
Note that for terminations for which the far end of the cable is not accessible either
because the cable has been run under carpet, in a conduit or structure, or is otherwise
fixed, the cable must be placed through the retaining ring (note the orientation of the
retaining ring) then through the mounting surface from bottom to top, then to the
module -
before the module is placed into the base assembly
(FIG. 4).
Step 2 - Provide a Service Loop
Ensure there is sufficient cable length to provide a service loop for the cable after the
module is installed into the Hydraport Base Assembly (FIG. 5).
FIG. 1
HPX-C5400-CN+A Component Video + Stereo UPX Module
HPX-C5400-CN+A Specifications
Dimensions (HWD)
100mm x 52mm x 37mm (3.94” x 2.05” x 1.46”)
Weight:
103g (3.63 oz.)
Enclosure:
Matt black finished face plate (ABS Plastic), sheet metal back
box (aluminum).
Front Connections:
RCA style connections for:
• Component Video (Y, Pb, Pr)
• Left Audio
• Right Audio
Rear Connections:
RJ45 (CAT 5) receptacle
Compatibility:
• HPX-1600 Hydraport Base Assembly
• AVX-400 CAT5 Switcher
• RCA Style Component (Y, Pb, Pr) Video Source
• 2 RCA style Stereo Audio Source
Included Accessories:
Installation Guide
FIG. 2
HPX-1600 - Power Inlet Cord Removed
AC Power Cord
Power Inlet Connector
on HPX-1600
FIG. 3
Backside Termination
FIG. 4
Fixed Cable Passing Through Ring, Table and Into the HPX-1600 Chassis
FIG. 5
Secured Service Loop
Module
Fixed cables pass-through
Retaining Ring, Surface
to Module
Fixed cables pass-through
Retaining Ring, Surface
to Module
Retaining Ring
Mounting Surface
HPX-1600 Chassis
