6
GOSSEN METRAWATT GMBH
•
Be absolutely certain that the measuring ranges are not overloaded beyond
their allowable capacities. Limit values can be found in the “Measuring
Ranges” table in chapter 14, “Characteristic Values”.
Meaning of symbols on the instrument
Warning concerning a point of danger
(Attention: observe documentation!)
Earth
Continuous doubled or reinforced insulation
CAT II
Measurement category II device
Indicates CE conformity
DKD calibration certificate (red label):
Repairs, Parts Replacement and Balancing
When the instrument is opened, voltage conducting parts may be exposed. The
instrument must be disconnected from the measuring circuit before repair,
replacement of parts or balancing. If repair or balancing of a live, open instrument
is required, this may only be carried out by trained personnel who are familiar
with the dangers involved.
Defects and Extraordinary Strains
If it may be assumed that the instrument can no longer be operated safely, it
must be removed from service and secured against unintentional use.
Safe operation can no longer be relied upon:
•
If the instrument demonstrates visible damage
•
If the instrument no longer functions
•
After long periods of storage under unfavorable conditions, e.g. humidity,
dust, excessive temperature (see “Ambient Conditions” on page 25).
!
Consecutive number
Registration number
Date of calibration (year - month)
German calibration service – calibration laboratory
B0730
01-08
DKD-K-
19701
