24
GMC-I Messtechnik GmbH
Control Functions
During Recording
STORE
is displayed underneath the analog display during memory
mode operation, and
memory occupancy
can be controlled:
StoP
000
.
3
%
The following message appears as soon as memory is full: “
100
.
0
%”.
In order to be able to
observe measured values during recording
,
switch to the measuring function by pressing
MEASURE | SETUP
.
The display is returned to the memory menu after once again
pressing
MEASURE | SETUP
.
A new memory block is created when another measuring function
is selected with the rotary switch or the
FUNC | ENTER
key. Data
storage then continues automatically.
Ending Recording
➭
“
StoP
” appears at the display after pressing
MEASURE | SETUP
.
StoP
start
➭
Acknowledge the “
StoP
” display by pressing
FUNC | ENTER
.
STORE
is cleared from the display, indicating that recording has
been ended.
➭
Press
MEASURE | SETUP
in order to return to the measuring
function.
➭
Memory mode operation can also be exited by switching the
multimeter off.
Querying Memory Occupancy
Memory occupancy can be queried during recording with the
help of the “
1nFo
” menu (see also chapter 6.3).
Memory occupancy range:
000
.
1
% to
099
.
9
%.
1nFo
bAtt
:
...
0CCvP
%:
017
.
4
%
Memory occupancy can be queried before recording is started via
the “
StorE
” menu.
1nFo
...
StorE
017
.
4
%
StArt
Clear Memory
This function deletes all measured values from memory!
This function cannot be executed during memory mode
operation.
1nFo
...
StorE
017
.4
%
w
StArt
CLEAr
empty
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
FUNC
ENTER
www.
.com
1.800.561.8187
