GB
GMC-I Messtechnik GmbH
11
7
Storing Minimum or Maximum Values
“MIN/MAX” Hold
With the MIN/MAX function, you can “hold” either the mini-
mum or the maximum measurement value which was
present at the measuring instrument input immediately
after activation of MIN or MAX. The most important appli-
cation is the determination of the minimum or the maxi-
mum measurement value in the long-term observation of
measurement magnitudes.
MIN/MAX has no influence on the analog display; it contin-
ues to display the current measurement value.
➭
Select the measurement function with the selector
switch and, if appropriate, with the multifunction key.
➭
Select the measuring range manually. Automatic mea-
suring range selection is not active in this mode.
➭
Connect the device under test as described in the fol-
lowing measurement instructions.
➭
Press the MIN/MAX key.
HOLD MIN is displayed. The measuring instrument con-
tinually updates and digitally displays the smallest occur-
ring measurement value. This function remains active,
and the respective minimum remains in storage, until the
MIN/MAX key is once again activated.
➭
Press the MIN/MAX key.
HOLD MAX is displayed. The measuring instrument con-
tinually updates and digitally displays the largest occur-
ring measurement value. If the MIN/MAX key is activated
again, this function is deactivated and the maximum
value is deleted.
HOLD MIN
HOLD MAX
MAN
MIN/MAX
MIN/MAX
MIN/MAX
