SUPER T SERIES
OM-07080
PAGE B - 1
INSTALLATION
INSTALLATION - SECTION B
Review all SAFETY information in Section A.
Since pump installations are seldom identical, this
section offers only general recommendations and
practices required to inspect, position, and ar
range the pump and piping.
Most of the information pertains to a standard
static lift
application where the pump is positioned
above the free level of liquid to be pumped.
If installed in a
flooded suction application
where
the liquid is supplied to the pump under pressure,
some of the information such as mounting, line
configuration, and priming must be tailored to the
specific application. Since the pressure supplied
to the pump is critical to performance and safety,
be sure
to limit the incoming pressure to 50% of the
maximum permissible operating pressure as
shown on the pump performance curve.
For further assistance, contact your Gorman‐Rupp
distributor or the Gorman‐Rupp Company.
Pump Dimensions
See Figure 1 for the approximate physical dimen
sions of this pump.
OUTLINE DRAWING
.69/[17,5] DIA
7 HOLES EACH SIDE
DISCHARGE:
4.00
−
8 NPT
SUCTION:
4.00
−
8 NPT
POWERED BY: ISUZU 2.2L 4LE2T DIESEL ENGINE
*
*
18.00/[457,2] RECOMMENDED FOR
REMOVAL OF BACK COVER PLATE
10.00/[254,0] REQUIRED FOR
REMOVAL OF BACK COVER PLATE
.69/[17,5] DIA
4 HOLES
2.75
[ 69,8 ]
23.75
[ 603,2 ]
95.50
[ 2425,7 ]
104.00
[ 2641,6 ]
14.00
[ 355,7 ]
.76
[ 19,2 ]
75.50
[ 1917,7 ]
14.75
[ 374,6 ]
29.50
[ 749,3 ]
44.25
[ 1124,0 ]
51.00
[ 1295,4 ]
5.50
[ 139,7 ]
34.74
[ 882,5 ]
45.14
[ 1146,5 ]
APPROX
3.79
[ 96,3 ]
8.93
[ 226,8 ]
6.95
[ 176,5 ]
2.75
[ 69,8 ]
2.75
[ 69,8 ]
7.38
[ 187,3 ]
DIMENSIONS:
INCHES
[MILLIMETERS]
Figure 1. Pump Model T4A60S-4LE2T FT4
