STEP 29: TARP
NOTE: IF YOU WISH
YOU MAY DRILL
1/8" PILOT HOLES IN THE
TARP BOARD FOR THE
PAN HEAD SCREWS.
1: PLACE THE TARP ACROSS THE TARP BOARDS WITH THE HEMS ON THE INSIDE.
2: FASTEN THE OUTSIDE CORNERS OF THE TARP TO THE SIDE OF THE TARP BOARD FIRST. ATTACH THE GROMMETS IN
THE TARP TO THE TARP BOARD WITH #14 X 1-1/4" PAN HEAD SCREWS WITH 1/4" WASHERS. REPEAT FOR OTHER SIDE.
(NOTE IF YOU WISH YOU MAY PREDRILL HOLES FOR THE PAN HEAD SCREW WITH A 1/8" DRILL BIT.)
3: NOW FOLD THE FLAP UNDER THE TARP BOARD AND FASTEN THE GROMMETS UNDER THE TARP BOARD WITH #14
X 1-1/4" PAN HEAD SCREWS WITH 1/4" WASHERS. REPEAT FOR OTHER SIDE. (NOTE IF YOU WISH YOU MAY PREDRILL
HOLES FOR THE PAN HEAD SCREWS WITH A 1/8" DRILL BIT.)
THE SIDE OF THE TARP BOARD ON
FASTEN OUTSIDE GROMMETS FIRST TO
DETAIL E
EACH SIDE WITH #14 X 1-1/4"
PAN HEAD SCREWS AND 1/4" WASHERS.
REPEAT FOR OTHER SIDE.
TARP
SCALE 1 : 12
THEN FOLD
THIS TAB UNDER
THE TARP BOARD
AND SECURE IT TO
THE BOTTOM
SIDE OF THE TARP
BOARD WITH
#14 X 1-1/4"
PAN HEAD SCREWS
AND 1/4" WASHERS.
REPEAT FOR OTHER SIDE.
E
64
Содержание 1500CT
Страница 6: ...THIS PAGE INTENTIONALLY LEFT BLANK ...
Страница 95: ...APPENDIX 87 ...
Страница 97: ...THIS PAGE INTENTIONALLY LEFT BLANK ...