Gorilla Playsets 01-0033-AP-1, Руководство пользователя

Страница: 84 / 146

8
"
3
"
1
8
1"
2
3
4 "
USE 2-1/2" WOOD SCREWS
IN THESE LOCATIONS
CENTER DECK
SUPPORTS
2 X 6 BOTTOM
PANEL BOARD
HEAD SHOULD BE FLUSH TO THE
DECK SPACER
BOTTOM PANEL BOARD.
DECK SPACER
DECK SPACER
NOTE: THE TOP OF THE SCREW
DECK BOARD
2" WOOD SCREW
UNIFORM (APPROX. 1/4") SPACE
5/4 X 3-3/8 X 14-1/2"
BETWEEN THE DECK BOARDS.
TOP OF THE DECK BOARDS.
4: FASTEN DECK SPACERS AND DECK BOARDS TO THE
CENTER DECK SUPPORTS WITH 2" WOOD SCREWS.
2 X 4 X 70" CENTER DECK SUPPORTS TO THE 2 X 6
5/4 X 3-3/8 X 22-1/2"
5/4 X 6 X 47-1/2"
2: START WITH A 5/4 X 6 X 47-3/8"
DECK BOARD AT ONE END OF THE
FORT. CENTER THE BOARD
BETWEEN THE FRONT FACE BOARD
AND THE REAR BOTTOM PANEL
BOARD AND ATTACH IT WITH 2"
WOOD SCREWS THROUGH THE
PREDRILED HOLES AND INTO THE
DECK SUPPORT BELOW. LEAVE A
3: USING TWO 2-1/2" WOOD SCREWS, ATTACH THE
5/4 X 3-3/8 X 22-1/2"
DECK SPACER
5/4 X 3-3/8 X 14-1/2"
&
STEP 10A: DECK BOARDS
THE FOLLOWING STEP IS RECOMMENDED TO PREVENT POSSIBLE SPLITS IN THE WOOD
1: PRE-DRILL THE ENDS OF THE DECK BOARDS TO PREVENT INSTALLATION DAMAGE. PRE-DRILL BOTH ENDS WITH A
1/8" DRILL BIT AT THE DIMENSIONS SHOWN BELOW. THE HOLES AT 22-1/8" & 17-3/8" ONLY NEED TO BE DRILLED
ONCE.
3
" "
8
"
8 "
4
4 "
8
1
4
1
4
1
8
22
"
1 3
1
2
17 38 "
49