129737
Instructions for Use
23
Trouble Shooting Guide
During operation, you can come across some
troubles that in most cases result from improper
handling of the appliance and can easily be
eliminated by the user.
Malfunction
Check the following:
The machine doesn't
operate:
Check the supply in the outlet socket and the fuse.
Make sure the cable cord is correctly plugged into the socket.
The socket is energized, but
the drum doesn't rotate:
Is the door correctly closed (if not, push them towards the machine).
if the program is started by pressing the START button;
If the condenser tank is full or not properly inserted up to the end
(only at condenser dryer)
if the correct drying time is set, or if appropriate program is selected.
Wet laundry:
Is the fluff filter clean?
Is the room well ventilated?
Is the amount of loaded laundry too large?
Is the vent pipe too long?
if the laundry loaded into the appliance had been dried enough, or if
the appropriate program has been selected.
Laundry not uniformly dried:
Is the amount of loaded laundry too large?
Does the load consist of only large pieces of laundry (always load
smaller and larger pieces together).
Does the load consist of laundry made of different materials (always
load clothes made of similar fabrics).
After you have considered all the above stated instructions and the malfunction still cannot be eliminated,
call the nearest authorised service.
Any claim or malfunction caused by improper installation or misuse is not covered by the guarantee. All
repair costs shall be covered by the user.
WE RESERVE THE RIGHT FOR MODIFICATIONS WITH NO INFLUENCE ON THE OPERATION OF THE
APPLIANCE.
THIS INSTRUCTION MANUAL CANNOT BE A REASON FOR A COMPLAINT.
