679870
58
Problem/
error
Indication on the display unit and
problem description
What to do?
Unevenly distributed laundry
When the washing programme is
complete, the symbol
will remain
lit on the display unit.
Manually distribute the laundry and run the
spinning programme.
See additional description under
TROUBLESHOOTING TABLE.
cln
System warning to run the Steril
tub (Self-cleaning programme)
After the washing programme is
complete, the signs »cln« and »End«
will alternate on the display unit.
We recommend running the Steril tub (Self-
cleaning programme).
»
PF
«
Power supply failure warning
(»PF«/Power Failure)
Washing process was interrupted due to power
supply failure.
To restart, press the (3)
START
/PAUSE button.
Unresponsive display unit and all
buttons
Manually (physically) stop the programme by
pressing the button (1) ON/OFF/
RESET
and
hold it for more than 3 seconds.
Unplug the power cord from the outlet; then,
plug the power cord back into the outlet and
switch on the washing machine.
If the error reoccurs, call a service technician.
Washing machine standing by,
ready to resume the washing
programme
The time remaining until programme
completion is alternately lit and off
on the display unit .
To resume the washing program, press
the button (3)
START
/PAUSE, or manually
(physically) stop the programme and press the
button (1) ON/OFF/
RESET
and hold it for more
than 3 seconds.
Preparation for unlocking the door
Signal lights will flash on the display
unit.
Wait until the process is completed. If no error
is indicated after the process, then a new
programme can be started.
Water has to be drained. Wait for the door to
unlock.
Noise and vibration
Make sure the appliance is levelled using
the adjustable legs and that the jam nuts are
securely tightened.
Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause problems
such as vibration and noisy operation. The washing machine detects such problems and the UKS*
(*stability control system) will be activated.
Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of materials with
special geometrical properties are virtually impossible to distribute evenly across the washing
machine drum (slippers, large items etc.). This results in several attempts to redistribute the laundry,
which in turn leads to longer programme duration. In extreme cases of unfavourable conditions, the
679870en.indd 58
679870en.indd 58
25. 02. 2021 09:45:10
25. 02. 2021 09:45:10
