Gorenje WA 63 Series, Инструкция по эксплуатации

Страница: 16 / 32

141576
Program is activated by pushing the START/PAUSE button (F).
Sound signal con
fi rms the start, the display indicates fi rst
washing stage and time left to the end of washing. Washing
stages are consecutively displayed in accordance with the
selected program.
If the machine is set with the delayed start, it will start operating
after the delay time expires.
If the pump stop function was set, the program will stop at the
fi nal rinse and the display indicates fl ashing sign pump stop
(RINSE).
You may conclude the program by pressing the START knob (F)
and the machine will
fi nish the program with the spin, determined
by that particular program.
In case you would like to alter the washing program, turn the
program selector to the position “0”, followed by the selection of
rinse or merely pumping the water out.
Low water temperature, low network voltage, and
smaller loads of laundry may extend the washing time;
the time indicated on the display is constantly adjusted
to account for such conditions.
- End of operation
• Sound signal indicates that you may now open the door of the
machine.
• Extract the laundry from the drum and remove any alien
objects from the door gasket.
• Leave the door ajar to allow the interior to dry.
• Close the water inlet faucet.
• Switch the machine off by turning the program selector (A) to
position “0”.
• Pull the power lead from the socket and cut the power supply
from the mains.
• By the user
Temporary interruption
By pressing the START/PAUSE knob (F) the program may be
suspended at any time.
If the Child lock is engaged you have to deactivate it
fi rst. Display
reads PAUSE.
After certain time you may open the door if the water level in the
drum is low enough, otherwise you must
fi st empty the water
(use additional program Pumping water out or Spin .
By pressing the START knob (F) the program is continued where
Start the operation Start the operation
Interruptions Interruptions
16