Gorenje VCK2000EA, Инструкция по эксплуатации

Страница: 25 / 48

25
DATA ON COMPLIANCE WITH EUROPEAN STANDARDS
Test for this type of appliance confirmed that it complies with the following
European directives:
•
73/23/EEC Low voltage
•
93/68/EEC CE Marking
•
89/336/EEC Directive on Electromagnetic Compatibility– EMC
This appliance is marked according to the European directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE). This guideline is the
frame of a European-wide validity of return and recycling on Waste
Electrical and Electronic Equipment.
ELIMINATION OF THE APPLIANCES AND ENVIRONMENT
If one day you decide to change your appliance, or you just do not need it any
more, think about the environmental protection.
VACUUM CLEANER ASSEMBLING
Always remove the plug from the power supply before fitting or removing
accessories. Before putting the appliance into service, please check if all filters
are inserted correctly.
ASSEMBLY OF THE SUCTION HOSE
•
Insert the flexible suction hose into the connection opening at the top of the
housing until you can feel it lock.
HOSE REMOVING
•
To remove flexible hose from the vacuum cleaner, press the buttons situated
on the flexible hose base, then pull to remove it from the attachment point.
ROLLING THE CABLE OUT AND UP
•
Pull out the cable to such a length that easy working is ensured. Now connect
the appliance to the main supply. Press the switch to activate the automatic
rewinder and hold on the mains plug for safety reason.
FITTING TELESCOPIC TUBE AND ACCESSORIES
•
Extend the telescopic tube to the desired length by pressing on button.
•
Insert a flexible hose into a telescopic tube.
•
Fit a nozzle to telescopic tube:
-
Floor brush is intended for cleaning bare floor and floor coverings.
-
Crevice/furniture nozzle is for cleaning corners and between cushions.
According to the mark rotate the nozzle to brush position to clean curtain or
dust on the decorating surfaces.