Gorenje VCK 1401 B, Инструкция по эксплуатации

Страница: 17 / 37

16
Data on compliance with
european standards
Test for this type of appliance confirmed that it
complies with the following European directives:
•
73/23/EEC Low voltage
•
93/68/EEC CE Marking
•
89/336/EEC Directive on Electromagnetic
Compatibility– EMC
This appliance is marked according to the European
directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE). This guideline is the frame of a
European-wide validity of return and recycling on Waste
Electrical and Electronic Equipment.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it
in at an official collection point for recycling. By
doing this, you help to preserve the environment.
Vacuum cleaner assembling
Always remove the plug from the power supply
before fitting or removing accessories. Before
putting the appliance into service, please check if
all filters are inserted correctly.
ASSEMBLY OF THE SUCTION HOSE
•
Insert the flexible suction hose into the
connection opening at the top of the
housing until you can feel it lock.
HOSE REMOVING
•
To remove flexible hose from the vacuum
cleaner, press the buttons situated on the
flexible hose base, then pull to remove it
from the attachment point.
ROLLING THE CABLE OUT AND UP
•
Pull out the cable to such a length that easy
working is ensured. Now connect the
appliance to the main supply. Press the
switch to activate the automatic rewinder
and hold on the mains plug for safety
reason.
FITTING EXTENSION TUBE AND
ACCESSORIES
•
Assembly the tube so you put the narrow
part of one tube into the wider part of the
other tube.
•
Insert a flexible hose into a extension tube.
•
Fit a nozzle to extension tube:
-
Floor brush is intended for cleaning
bare floor and floor coverings.
-
Crevice/furniture nozzle is for cleaning
corners and between cushions.
According to the mark rotate the nozzle
to brush position to clean curtain or
dust on the decorating surfaces.
Instruction for use
•
Before using the appliance, unwind a
sufficient length of cord and insert the plug
into the power supply.
•
Press the On/Off button to switch the unit
on. To stop it press the On/Off button again.
•
You can adjust the air flow using the air flow
regulator on the flexible hose:
-
decrease power for cleaning curtains,
books, furniture, etc.
- increase power for cleaning bare floor.
To rewind the cord, press the rewind button and
guide the cord with hand to ensure that it does
not whip causing damage.
Maintenance
1. Changing of the dust bag
•
Always operate the cleaner with dust bag
installed.
•
If you forget to attach the dust bag or attach
it in the wrong manner, the dust cover may
not close completely.
1. After removing the flexible tube, open the
front cover.
2. Rotate the support of the bag to the correct
position.
3. Remove the dust bag.
4. Replace the paper bag when it is full of dirty
and put in a new one.
5. Close the cover by passing down unitil it is
locked.