background image

Instructions for use, mounting and connection

57

Major stains

 are removed with special ceramic-

glass cleansers. Follow strictly the manufacturer's
instructions.

Be careful to remove any remains of
cleansing agent from the hob surface,
otherwise they will be heated during the next
use and can damage the hob

 (fig. 3).

Stubborn and burnt stains

 are removed with

special ceramic-glass scraper. Be careful,
however, not to touch the hotplate surface with
the scraper handle (Fig. 4).
Handle the scraper with utmost care to avoid
injuries!

Sugar and sugar containing

 food  may

permanently damage the ceramic-glass hob
surface (Fig.5), so the remains of sugar and
sugar containing food must be scraped off from

the  hob surface immediately, when the hotplates
are still hot (Fig. 4).

Discoloring of ceramic-glass hob

 has no effect

whatsoever on its operation and stability. In most
cases, it appears as the consequence of burnt in
food remains, or as a result of dragging pots and
pans (especially aluminum or copper bottom
cookware) across the surface, and such
discoloring is rather hard to remove.

• 

Note:

 All described faults are mostly esthetical

and do not affect directly the operation of the
appliance. Remedy of such faults is not
covered by warranty.

Technical information

Type

SVK61TS

SVK62TS

SVK63TS

SVK66TS

SVK67TS

Electrical connection

2N AC 400 V

Working voltage

230 V, 50 Hz

Type of switch

Electronic sensors

Cooking zones 

(

φ

 mm/kW)

HL

 = Hi-light cooking zone

Forward left

210/175/120/2,3/HL 210/175/120/2,3/HL210/120/2,2/HL 210/2,3/HL 210/120/2,2/HL

Rear left

145/1,2/HL

145/1,2/HL

145/1,2/HL

145/1,2/HL

145/1,2/HL

Rear right

170x265/2,4/HL

180/120/1,7/HL170/265/2,4/HL 180/1,8/HL 180/120/1,7/HL

Forward right

145/1,2/HL

145/1,2/HL

145/1,2/HL

145/1,2/HL

145/1,2/HL

Total power

 (kW)

           7,1

           6,4

    7,0

   6,5

    6,3

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE TO

THE OPERATION OF THE APPLIANCE.

Содержание SVK61TS



















Отзывы: