28
Danger
Never immerse the appliance, the charging
base or the adapter in water or any other liquid,
no rinse it under the tap.
Important warnings
•
Check if the voltage indicated on the charger
or on holder with power cord (charging base)
corresponds to the local mains voltage before
you connect the appliance.
•
Do not use the vacuum cleaner or the
charging base (or adapter – depends on your
chosen model of vacuum cleaner) if it is
damaged.
•
If the charging base (or adapter) is damaged,
always have it replaced with one of the
original type in order to avoid a hazard.
•
The adapter contains a transformer. Do not
cut off the adapter to replace it with another
plug, as this causes a hazardous situation.
•
Never use the vacuum cleaner without the
filters.
•
Vacuum cleaner use only for home and in the
inner rooms.
Caution
•
Remove the power cord (or adapter) from the
wall socket before you clean the holder.
•
Charge the vacuum cleaner only with the
adapter and charging base which is enclosed.
It is normal, that during charging, the adapter
feels warm to the touch.
•
Always switch off the vacuum cleaner after
use.
•
Never block the exhaust air openings during
vacuuming.
•
Switch off the appliance when you charge it.
•
Always use the vacuum cleaner with the filter
unit assembled.
Before first use
Remove any protective foil or plastic from the
appliance.
Assembling vacuum cleaner
First, assemble holder with a power cord, as
shown on the picture below.
Then insert the handle into housing of vacuum
cleaner. There is an opening in the housing
where it is necessary to insert and screw the
screw which is attached to the vacuum cleaner.
Picture below.
Next step is to insert electric turbo brush into
the housing of vacuum cleaner, as shown on
picture below.