Gorenje SB 800 B, Инструкция по эксплуатации

Страница: 19 / 50

19
The chosen accessory is placed correctly when the
signs on the motor unit and on each accessory are in
the same way. Then you must turn selected accessory
clockwise and you will hear a "click".
When finished the working, you must turn the chosen
accessory anti-clockwise.
Control panel

After properly placing the selected accessory on
the motor unit, turn the operation knob to activate
the unit from its off position. Choose the reqested
speed.
CHOPPER
CAUTION : Make sure that the unit is unplugged from
power source and operation button is on “OFF” before
inserting or removing any attachments and before
cleaning.
WARNING: Use extreme caution, blades are sharp.

IMPORTANT: The chopper bowl will not operate if
the security cover is not closed correctly and if it is
not placed properly on the motor unit.
WARNING: To reduce risk of injury, never place
the chopping blade on the motor unit without
first putting the bowl properly in place.

Place the motor shaft firstly on the motor unit.
After this place the bowl for chopper correctly on
the motor unit. The signs on the motor unit and on
chosen accessory must be in the same way. Then
you must turn selected accessory clockwise and
you will hear a "click".

Place the chopping blade on the shaft inside the
bowl.

Make sure that the chopping blade is correctly
positioned in its place.

When the chopping blade is placed, put the
chosen ingredients in the bowl. Then place the lid
of the chopper correctly and turn on the appliance.
WARNING: Use extreme caution
– Blades are
sharp, handle carefully. Always hold the
chopping blade by the upper plastic part. After
using the chopping blade, always take it out of
the bowl before removing the processed food.

Keep hands and utensils away from the cutting
blade while chopping food, to reduce the risk of
severe injury to persons or damage to the food
chopper. A spatula may be used, but must be used
only when the food processor is not running.

Never feed food by hand. Always use food pusher.

Do not leave the appliance unsupervised when it is
operating i.e. when it is “ON”.
Continuous Slicer / Shredder
CAUTION: Make sure that the unit is unplugged from
power source and operating button is on” “OFF” before
inserting or removing attachments.

If using the blades (discs) instead of chopper, the
procedure of preparing the appliance is the same
as for chopper accessory. Just instead of chopping
blade you should use your chosen disc. The
selection of the disc depends on your wishes
regarding food preparation.

WARNING: Use extreme caution
– blades are
sharp. Handle carefully.
BLENDER
CAUTION : Make sure that the unit is unplugged
from power source and operation button is on “OFF”
before inserting or removing any attachments and
before cleaning.

Place the assembled blender on the motor unit
correctly. The signs on the motor unit and on the
blender must be in the same way. Then you must
turn selected accessory clockwise and you will
hear a "click". When finished the working, you must
turn the chosen accessory anti-clockwise. You
must put the ingredients into the bowl of the
blender after the blender is placed on the motor
unit properly.

Before turn on the blender, you must place the
blender lid correctly. If you are adding some
ingredients into the bowl of the blender, add them
through the small lid of blender.

IMPORTANT: Blender does not work if it is not
placed correctly on the motor unit. During the
working, the bowl must be empty. No attachments
into the bowl.
RECOMMENDATIONS
IMPORTANT: After suggested working time, your
appliance at the same time needs some idle time. This
will prolong the lifetime of your appliance.
Check the
table below.
Thesuggested times below depend on the hardness
and quality of the food or ingredients as well.