Gorenje Ora-Ito GV60ORAB, Руководство по эксплуатации

Страница: 19 / 32

Troubleshooting
Action Type of fault on the
display
Clear the drainage pump. See the section Care and
cleaning. If the problem persists, call the service
department. Overfilling F10
See “Water remains in the dishwasher” in the table
“Problem” below. If the problem persists, call the service
department. Water outlet fault F11
Check that the water tap is on. If the problem persists,
call the service department. Water inlet fault F12
Turn off the water tap and call the service department. Inlet valve leakage F40
Call the service department. Water level fault F52
Turn off the water tap and call the service department. Overfilling F54
Call the service department. Circulation fault F56
Press any button to clear the error message.
Action Possible causes Problem
Wait a moment then try
again. You have pressed the
buttons too soon after
opening the door. The buttons do not react
when pressed.
Clean with a dry or slightly
damp cloth. The buttons are dirty.
Open the door. The buttons
only react to use when the
door is open. The door is closed.
19