Gorenje IT 606 ASC, Инструкции по использованию, установке и подключению

Страница: 8 / 24

260938
•
After connecting the glass ceramic hob to the power mains, all
symbols on the display will light up brie fl y. The cooking hob is
then ready for operation.
• The cooking hob is fi tted with electronic sensors which are
activated by touching the designated surface areas with your
fi nger for at least one second.
• Each time a sensor is activated, this is con fi rmed by a beep.
• Do not place any objects on the sensor area. Make sure the
sensor area is always clean.
Touch the on/off sensor (A) for at least one second. The cooking
hob is now activated; a “0” is lit and the decimal point (B1) next
to each power display (B) is
fl ashing.
The following setting must be effected in the next ten
seconds; otherwise, the cooking hob will be switched
off.
If the cooking hob was switched on with the on/off key (A),
the desired cooking zone can be activated in the following 10
seconds.
•
After touching the sensor for the desired cooking zone (C), a
symbol “0” and a decimal point (B1) will light up for the selected
zone.
• By touching sensors »+» (C) or »-« (E) set the desired cooking
power from 1 to 9.
Continuous pressing of »+» (C) or »-« (E) ssensor the
power level is automatically increased or reduced.
Another procedure is to change power in steps is by
intermediate touching of relevant sensors.
Power settings can only be changed for one cooking
zone at a time; the cooking zone currently selected
for power settings is indicated by a
fl ashing decimal
point (B1).
•
Selected hotplate must be activated, decimal dot (B1) is on.
•
Touch the cooking zone on/off sensor to “-” (E) to set the
cooking level to “0”. If the power of all cooking zones is set to
“0”, the cooking hob will be switched off after 20 seconds.
Switching on the
cooking hob
Turning hotplates on
Turning hotplates off
8
Hob control