Gorenje ICT621AC, Инструкции по использованию, установке и подключению

Страница: 57 / 84

57
one of the hotplates.
• Touching the desired hotplate sensor (C), its relevant power indicator
indicates »0« and (B1) is on.
• By touching sensors (C) or (E) set the desired cooking power from 1 to 9.
Continuous pressing of (C) or (E) sensors the power level is
automatically increased or reduced.
Another procedure is to change power in steps is by intermediate
touching of relevant sensors.
Setting is always possible for one hotplate only at the time - the one with
(B1) on.
Power display indicates »0«, or „H“, depending on the existing
temperature of the hotplate (see Section Remaining Heat Indicator).
You can also turn the hotplate off prior the end of cooking and use the
remaining heat, and save energy.
Turning hotplates off
• Selected hotplate must be activated, (B1) is on.
• Touching the sensor (E) set the power level to »0«. After 10 seconds the
hotplate is turned off.
Fast deactivation
• Selected hotplate must be activated, (B1) is on.
• Press both (C) and (E) sensors simultaneously, and the hotplate is
immediately switched off.
Turning the hob off
• The hob can be switched off any time by pressing the sensor (A).
Child lock
By activating the child lock protection you can stop the operation of the
appliance, i.e. the use of hotplates, protecting the children from accidental start
and eventual injury.
Activating child lock
• Switch all hotplates off (setting “0”).
• Touch sensor (A) and activate the hob (in case it was idle). All displays
indicate »0«.
• Press sensors (D=C+E) simultaneously. After the beep press the sensor (C)
again. All displays indicate letter »L«, which disappears after a few seconds.
Child lock is now activated.
Turning child lock off
• Protection is switched off by pressing the sensor (A). All displays indicate the
letter L.
• Press simultaneously sensors (D=C+E). After the beep press sensor (E)
again. Child lock is now off.
Remaining heat indicator Glass ceramic hob also features remaining heat indicator “H”. Hotplates are
not heated directly, but through return heat radiating from the dish. As long as
the symbol “H” is on after the hotplate was switched off, the remaining heat
may be used for warming up food or for melting.
Even when the symbol “H” disappears, the hotplate may still be hot. Be careful
of burns!
Extra powerful setting
(hotplates marked “P”) Extra powerful setting may be additionally switched on for fast cooking on
hotplate 3. This extra hotplate power is used for heating large quantities of
food.
After switching on, the extra power is activated for 5 minutes, then
automatically switches back on to the maximum normal level 9.
During the time extra power is activated, the power of other hotplates is limited.
This is indicated on the power display by intermittently showing the selected
cooking level and limited power.
Activating extra powerful setting
• First select the hotplate by touching its relevant sensor, and immediately after
press the sensor (F). Extra powerful setting is on, and power indicator displays
symbol “P”.
• After ten minute lapse the hotplate automatically switches to level 9.
Premature turning extra powerful setting off
Touch the desired hotplate sensor, and immediately after press the sensor (F).