Gorenje GV67261XXLCUS, Руководство по эксплуатации

Страница: 9 / 24

programs and some options cannot be combined (available
options glow dimly).
SpeedWash
This option shortens the program time, but uses more ener-
gy and water.
Auto open
The dishwasher door opens automatically at the end of the
program, which improves the drying results. (If the dishwash-
er is built-in, the surrounding furnishings must be resistant
to any condensation.)
NOTE!
The dishwasher door must not be blocked when set to
open automatically. This can disrupt door lock functional-
ity.
Extra hygiene
This option is intended for items with particularly high sani-
tation requirements, such as baby bottles and cutting boards.
The temperature is increased in both the main wash and
the final rinse.
Delayed start
When you select Delayed start, the dishwasher will start 1-
24 hours after you close the door.
1
Press the button once to activate Delayed start. Press
the button several times – or hold it in – to set the de-
sired number of hours.
2
Close the door and the dishwasher display counts down
1 hour at a time and starts after the selected delay.
If you want to cancel the Delayed start option, open the door
and press and hold the main power switch until the display
turns off.
Starting the dishwasher
Press and hold the desired program until the program
symbol starts to flash. Close the door within four seconds
to start the dishwasher.
TIME - Time remaining
Once you have chosen a program and options, the time the
program took when last used is displayed.
Status light
The status light on the bottom part of the dishwasher indi-
cates that a program has started.
Flashing light
This indicates a fault. See further in the chapter Trou-
bleshooting.
Status light
Stopping or changing a program
If you want to change program after starting the dishwasher,
open the door then press and hold the main power switch
until the display turns off. Add more detergent if the lid of
the detergent dispenser has opened. Then press the main
power switch again to choose a new program.
WARNING!
The dishwasher door must not be open while a program
is in progress. If the door is open, "STR" is shown on the
display. If you want the dishwashing program to continue,
press any button and close the door immediately. If you
want to cancel the dishwashing program, press and hold
the main power switch until the display turns off.
If the dishwasher is turned off due to a
power failure
If the program was not finished, the interrupted program
resumes when power is restored.
NOTE!
During drying, the program is interrupted if the power is
cut or the door is open for more than 2 minutes.
How to get the best drying results
•
Fully load the dishwasher.
•
Angle dishes with hollows, such as cups, so that the
rinse water will run off. This is also important for plastic
items.
•
Top up with rinse aid or increase the rinse aid dosage
level.
•
Activate the Auto open option.
•
Allow the dishes to cool before unloading the dishwash-
er.
Once the program has finished
The end of the program is indicated by one short signal from
the buzzer. The chapter Settings describes how to change
this function.
Moreover, the end of the program is indicated by the status
light turning off. See Status light in the chapter Using the
dishwasher.
9