Gorenje GV67261XXLCUS, Руководство по эксплуатации

Страница: 21 / 24

NOTE!
Framed cabinets require additional finished filler material
behind the face frame for a proper installation. A minimum
3½” (89 mm) finished return is required on all sides of the
opening.
3½”
(89)
3½”
(89)
3
/
4
”
(19)
Frameless
cabinetry
Filler
Framed
cabinetry
Drain connection
See the separate installation instructions for necessary in-
formation.
This dishwasher is suitable for installing in a raised recess
(to attain an ergonomic working height). This means that
the dishwasher can be placed so that the drain hose runs
to a lower level than the bottom of the dishwasher, such as
by routing it directly to a floor drain. The dishwasher is fitted
with an integrated anti-siphon device to prevent the machine
from being emptied of water during the wash cycle.
The drain hose can also be connected to a connection nipple
on the sink unit's water trap. The connection nipple must
have an internal diameter of at least 0.6" (14 mm).
The drain hose may be extended by a maximum of 118" (3
m) (the total length of the drain hose must not exceed 177"
(4.5 m)). Any joins and connecting pipes must have an in-
ternal diameter of at least 0.6" (14 mm). However, the drain
hose should ideally be replaced with a new hose without
joins.
No part of the drain hose may be more than 37.4" (950 mm)
above the bottom of the dishwasher.
Ensure that the drain hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do
not re-use old or other spare hoses.
The supply pipe must be fitted with a water supply valve.
The water supply valve must be easily accessible, so that
the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water supply
valve and allow the pressure to settle for a while. Check
that all connections are watertight.
Water supply
The machine can be connected to either a cold
2)
or a hot
(max. 160 °F (70 °C)) water supply. The water pressure
should be 4.2-140 psi.
Connection to cold water supply
Connect the dishwasher to the cold water supply if the
building is heated using oil, electricity, or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 160
°F (70 °C)) if the building is heated using an energy-efficient
means such as district heating, solar power, or geothermal
power. Choosing a hot water connection cuts dishwashing
times and reduces the dishwasher's energy consumption.
NOTE!
Do not exceed the permitted water supply temperature.
Certain materials used in some cookware cannot with-
stand strong heat. See Fragile dishes in the chapter
Loading the dishwasher.
Electrical connection
Information about the electrical connection can be found on
the serial number plate. This specification must match the
electricity supply.
The power supply receptacle for the appliance must be in-
stalled in a cabinet or on a wall adjacent to the undercounter
space in which the appliance is to be installed. Do not use
an extension cord for this appliance.
Use caution when the appliance is installed or removed to
reduce the likelihood of damage to the power supply cord.
Grounding Instructions
This appliance must be grounded. In the event of a malfunc-
tion or breakdown, grounding will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This appliance is equipped with a cord fitted with
an equipment grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local codes
and ordinances.
WARNING!
Improper connection of the equipment grounding conduc-
tor can result in a risk of electric shock. Check with a
qualified electrician or service representative if you are in
doubt as to whether the appliance is properly grounded.
Do not modify the plug provided with the appliance. If it
does not fit the outlet, have an appropriate outlet installed
by a qualified electrician.
2)
Recommended.
21