background image

GB 17

OPERATION

Cooking timer/Egg timer

A cooking timer can be set for each cooking zone. All of the cooking 
timers can be used at the same time. The hob also has an egg timer. 
Both the cooking timer and the egg timer can be set to a maximum of 99 
minutes.

The egg timer works the same way as the cooking timer, but is not 
linked to a cooking zone. If set, the egg timer will continue to run after 
the hob has been switched off. The egg timer can only be switched off 
when the hob is switched on.

The cooking timer

The egg timer

The cooking timer must be linked 
to a cooking zone. This means 
that the cooking zone switches off 
when the set time elapses.

The egg timer is not linked to 
a cooking zone. The egg timer 
continues after the hob has been 
switched off.

Switching on the egg timer

The hob is switched on, all displays show ‘0.’ (no cooking zone is active).

•  

Press the timer button once.

‘00.’ is shown in the display with a blinking dot. There is no timer 
indicator in the timer display. 

•  

Use the - button or the + button to set the desired time.

•  Press the timer button again to confirm the setting. 

The egg timer starts. After 10 seconds the hob automatically 
switches off, the egg timer continues.

 

If you do not set a time with the - and the + button, the egg timer 
will automatically switch off after 10 seconds.

Switching off the egg timer

The hob must be switched on, all displays show ‘0.’ (there is no cooking 
zone active).

•  Press the timer button once.

The remaining time is shown in the display with a blinking dot. There 
is no timer indicator in the timer display.

•  Touch and hold the - button until ‘01.’ appears in the display. 

Press the - button one more time; ‘00’ appears in the display. 

The egg timer is now switched off.

 

You can also touch the - button and the + button simultaneously 
to switch off the egg timer at once.

Содержание GIS77SC





































Отзывы: