Gorenje GI 52108 A, Руководство пользователя

Страница: 16 / 20

14
ELECTRICAL CONNECTION
The electrical connection must be carried out in
accordance with the current standards and laws in force
and by a qualified electrician.
WARNING!!
This appliance must be earthed.
This appliance operates from a 3 pin, 3 amp plug,
supplied fitted to the appliance. The voltage rating is
230 Volt and should be protected by a 3 amp fuse in the
plug. Should the fuse require replacement, it must be
replaced with a fuse rated at 3 amp approved to
BS1362.
Should this plug not fit the socket outlet in your home it
should be cut off and replaced with a suitable plug as
outlined below.
NOTE:
The removed plug cannot be used for any other
appliance and should therefore be properly disposed of
and not left where children might find it and plug it into a
supply socket
– with the obvious consequent danger.
Fig. 15
IMPORTANT:
The wires in the mains lead on this appliance are
coloured in accordance with the following code:
Green and Yellow
= Earth
Blue = Neutral
Brown = Live
As the colours may not correspond with the markings
identifying the terminals in your plug, proceed as
follows:

The green and yellow wire must be connected to the
terminal in the plug which is marked with the letter E
or with the earth symbol or coloured green and
yellow.

The blue wire must be connected to the terminal
marked with the letter N or coloured black.

The brown wire must be connected to the terminal
marked with the letter L or coloured red.
LEVELING THE APPLIANCE (CERTAIN MODELS ONLY)
Cooker hob must be leveled in horizontal position by means of 4 leveling screws supplied with the appliance.
PROCEDURE:

Remove the range receptacle;

Tilt the cooker on one side;

Screw plastic screws into the bottom crossbar front and rear openings on one side;

Tilt the cooker on the opposite side and fix the screws into the openings on the other side;

Level the cooker using a screwdriver from the receptacle area, or by turning the leveling screw with a hexagon wrench;

The procedure is less complicated if performed by using leveling screws.
NOTE:
Leveling screws are unnecessary if the appliance height and horizontal position are acceptable.