Instructions for Use
8
Changing the Direction of Opening the Door
If you find the direction of opening the door on
your appliance inconvenient, you can change
it. Holes on the opposite side have already
been prepared in the factory and are now
plugged.
•
Unscrew the lower hinge with foot and
remove the door ot the appliance.
•
Unscrew the other foot and fix it on the
place where previously was the hinge with
the foot.
•
Rotate the fastener having the function of
the upper hinge counter clockwise, take it
off and replace it on the opposite side of the
door.
•
Take off all door corners and interchange
them (instead of the corner with a hole
insert the one without the hole and vice
versa).
•
Put the door on the fastener having the
function of the upper hinge.
•
Put the fastener with foot of the lower hinge
(with a washer) into the plastic corner with a
hole and fix the lower hinge.
•
Unscrew the handle and replace it on the
opposite side (not for handles mouinted
horizontally). Some screws are covered with
caps. Take them off before undoing the
screws.
•
Plug the remaining holes with decorative
caps.
•
Check the gasket, it shouldn't be creased
and it should seal well.
1
Lower hinge with foot
2
Foot
3
Fasttener
4
Handle
Changing the Direction of Opening the Door
If you find the direction of opening the door on
your appliance inconvenient, you can change
it. Holes on the opposite side have already
been prepared in the factory and are now
plugged.
•
Unscrew the lower hinge with foot and
remove the door ot the appliance.
•
Unscrew the other foot and fix it on the
place where previously was the hinge with
the foot.
•
Rotate the fastener having the function of
the upper hinge counter clockwise, take it
off and replace it on the opposite side of the
door.
•
Put the door on the fastener having the
function of the upper hinge.
•
Put the fastener with foot of the lower hinge
(with a washer) into the plastic corner with a
hole and fix the lower hinge.
Unscrew the handle and replace it on the
opposite side (not for handles mouinted
horizontally).
Some screws are covered with caps. Take
them off before undoing the screws.
•
Plug the remaining holes with decorative
caps.
•
Check the gasket, it shouldn't be creased
and it should seal well.
Downloaded from Fridge-Manual.com Manuals
