Gorenje EIT 2600 P2, Руководство пользователя

Страница: 17 / 20

137815
open position. This may be done by means of fuses, safety
switches, etc.
• The connection should be selected in accordance with the
declared charge capacity of the mains and the fuse power.
• Such appliances are allowed to be mounted on one side next
to a high kitchen cabinet, the height of which may exceed that
of the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
• Upon the completion of installation, live wires and isolated
cables must be adequately protected against accidental
touching.
Upon each connection to the power supply the sensors of the
appliance are automatically adjusted to the environment to
ensure their proper function. All displays turn on and are fully
illuminated for a few seconds.
During the adjustment procedure the sensors must be free of any
objects, otherwise the adjustment procedure will be interrupted
until such objects are removed from the sensor surface. During
this period the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect
the power supply. In accordance with the mains voltage the
appliance should be connected in line with the attached diagram.
The earthing wire (PE) must be connected to the terminal
marked with the earthing symbol .
The connection cable must lead through the relief safety device,
protecting it from accidental pulling out. Upon the completion
of installation switch all the hotplates on for about 3 minutes to
check the proper functioning.
Connection may be carried out by means of:
- rubber coated connection cables, model H05 RR-F 4x1,5 with
yellow-green earthing cable;
- PVC insulated connection cables, model H05 VV-F 4x1,5 with
yellow-green earthing cable; or any other suitable cables.
Basic adjustment of
sensors to the ambience Basic adjustment of
sensors to the ambience
Installation diagram Installation diagram
37