Instructions for use, installation and connection
119
Colored power leads
L1, L2, L3 = exterior power leads under tension. Usual colors
are black, black, brown.
N = neutral lead
Usual color is blue.
Watch for the correct N-connection!
PE = earthing (protective lead)
Lead color is green-yellow
Technical information
Tyre-model
E44Z2-T33
E44Z2-T34
E44Z1-T34
Dimensions
(heigh/width/depth) cm
85/60/60 and 90/85-60/60
Hotplate
(Ø cm/kW)
HL
= HI-Light heater
Rear left
145/1,2/HL
Front left
210/175/120/2,3/HL
Front right
145/1,2/HL
Rear right
140x250/2,0/HL
Oven
Tenperature regulator/
function mode switch
1/1
Guide levels
(telescopic guides in 3levels-only certain models)
5
Top/bottom heater (kW)
0,9/1,1
Infrared heater with ventilator (kW)
2,0/2,2
Oven illumination rear/middle (W)
25/25*
Function modes
Top/bottom heater (kW)
2,0
Infrared heater (kW)
2,0
Infrared heater with fan (kW)
2,0
Hot air/bottom heater (kW)
3,4
Hot air (kW)
2,2
Defrosting (W)
50
Bottom heater/fan
1,1
Bottom heater (kW)
1,1
Top heater (kW)
0,9
Max. temperature
275 °C
Electric connection
400 V 3N~, 50 Hz
Nominal voltage of heaters
230 V
Total connected power (kW)
10,1
Oven total (kW)
3,4
Hotplates total (kW)
6,7
* depending on the equipment of the appliance
After sale service
Repairs
If you find your cooker malfunctioning and requiring
repair, contact our nearest service center and quote the
code and the type or model of the appliance.
Attached is the list of service centers with addresses and
phone numbers.
Important!
Before contacting the service center, check if you can repair
the malfunction, using the instructions from the
Troubleshooting guide section.
If the malfunction of the appliance was caused by the improper
use, the service visit during the warranty period is not free of
charge.
Save these instructions and keep them always handy. In
case you sell the appliance, give the instructions to the
new owner.
Rating plate
Rating plate is located at the bottom on the side when you
open the oven door.
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE
OPERATION OF THE APPLIANCE.
