18
CONDENSATE DISCHARGE
max 80 cm
401681
The moisture from the laundry is extracted in the condenser unit
and accumulated in the condensate tank.
During the drying process, a control light will warm you of a full
condensate tank which has to be emptied.
Interruption of the drying cycle due to full condensate tank can be
avoided by running the condensate discharge tube found at the
back of the appliance directly into a drain.
If the condensate discharge tube is run into a drain, make sure
the tube is firmly secured. This will prevent any water spillage
which could result in unexpected damage.
In this case, the steam generator tank will not be filled
automatically. It will always require manual filling (see section
Filling and replenishing the steam generator tank).
1
Pull the tube to
remove it with
flat screw-driver,
from the holder on
the appliance back
wall (on the left
hand side under the
cover).
2
Install tube into
the drain, at
a height of 80 cm
from the ground.
Содержание D764BJ
Страница 1: ...EN DETAILED INSTRUCTIONS HOW TO USE YOUR DRYER www gorenje com...
Страница 50: ...50 401681...
Страница 51: ......
Страница 52: ...SP10 EXCL en 05 18...