33
814554
SWITCHING THE APPLIANCE ON/OFF
When you connect the appliance to
the power mains for the first time, the
appliance will be in standby mode
(switched off, but powered).
Switching on the appliance:
To switch
on the appliance, press the
A
key.
A
beep will be sounded and the
temperature will be displayed on
display
B3
.
Switching off the appliance:
To switch
off the appliance, press the
A
key
and hold it for a while (2 seconds). A
beep will be sounded again and the
outer segments of the display digits
B3
will light up in the clockwise direction.
The appliance is in standby mode (it is
still powered).
ADJUSTING THE TEMPERATURE IN THE APPLIANCE
• The appliance temperature is preset at the factory to the recommended
setting, i.e. 4 °C for the refrigerator compartment and –18 °C for the
freezer compartment.
• After the appliance is switched on, it may take several hours for the set
temperature to be reached. Do not place any food into the refrigerator
before the temperature drops to the selected setting.
i
In this model, you can switch between
setting the temperature of the
refrigerator and the temperature
of the freezer compartment. To do
this, press the
B
key and hold it for
two seconds until the symbol for the
desired compartment lights up:
B1
for
the freezer compartment and
B2
for
the refrigerator compartment.
1
2
3
4
5
6
7
8
Содержание COMBI FS-600
Страница 1: ...www gorenje com www gorenje com EN DETAILED INSTRUCTIONS FOR USE OF UPRIGHT REFRIGERATOR AND FREEZER...
Страница 63: ......
Страница 64: ...COMBI FS600 20 ADV en 02 20...
