Gorenje BG3 A Series, Руководство пользователя

Страница: 25 / 28

Tools needed:
T1 Socket spanner (7 mm)
T2 Screwdriver flat blade (4 mm)
T3 Nose pliers
T4 Open-end spanner (7 mm)
T5 Leak test spray
Converting nozzles
NOTE!
Please note: disconnect the appliance from the power supply.
Prevent damage of the worktop. Lay down parts of the appliance on a protected base.
For converting to a different type of gas, the nozzles have to be changed.
The values are also marked on the nozzle.
1. Remove pan supports, burner heads, crowns and covers (see pictures A1 and A2).
Pull off the control knobs vertically.
2. Use the socket (T1) or open-end spanner (T4) to remove the old nozzles and place the new nozzles
inside the burner cups (see pictures A1 and A2).
Converting by-pass screws
Depending on the gas type to which the appliances will be converted, there are two ways to adjust
the by-pass screws.
Please check the conversion table in the column “Modification” if the by-pass screws have to be
screwed completely in (see action 3A), replaced by a different by-pass screw (see action 3B) or adjusted
(see action 3C).
The values are also indicated on the top of the by-pass screws. The by-pass screws can be reached
from the top of the hob when the knobs are removed (B2).
3A. Screw the by-pass screws (3) of all gas taps completely in by using the flat-blade screwdriver
(T2).
25