Gorenje BDF 34 X, Инструкция по эксплуатации

Страница: 7 / 10

7
TECNICAL INFORMATION
KF30S23T0001
– KF30S23T0002
Dimension (mm) 288
Rated voltage
220-240 V~ 50/60 Hz
Type of switch Knobs
Total power (W) 2300
Before the first using
Remove any protective foil and adhesive labels.
Remove the basket, lift the electrical resistance and remove the oil pan.
Accurately wash and dry the pan and the basket (preferably in a dishwasher).
Place the pan and the resistance.
Fill the oil pan with approx. 4 litres of water and ensure that the water level is not
higher than the maximum level marker at the back of the pan.
Turn
the right knob in a clockwise direction to 150 °C and bring the water to the
boil.
Turn off the fryer and let it cool down.
Empty the pan and accurately dry it and the electrical resistance .
Filling with oil Remove the basket
Fill the pan with about 2-3 liters of oil. If you use the fat, you must dissolve it in
advance. The level should be between the maximum and minimum marks shown
on the pan
.
Safety thermostat The appliance is fitted with a safety thermostat with manual reset which turns the
appliance off when the temperature increases too much
:

the oil reservoir is not filled to at least the lower level marker.

the fryer is switched on when empty

the fryer is switched on when the heating element has been raised
The fryer has cut out automatically when the temperature and in-operation
indicator lights are on but the oil or fat is no longer hot.
To turn on the fryer again:

Turn the control to "0" and wait until the heating element has cooled down.

Lift the electrical resistance and remove the oil pan

Unscrew the cap on the inside of the right front side (as shown in Figure A)
with a screwdriver

Press in pin (as fig. B)