INSTALLATION
CAUTION:
THIS APPLIANCE MUST BE INSTALLED BY A PROFESSIONAL
ELECTRICIAN, AND IN
ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS BEFORE CARRYING OUT ANY ADJUSTMENT OR REPAIR
ON THE APPLIANCE, MAKE CERTAIN IT IS DISCONNECTED FROM THE
ELECTRICAL POWER SUPPLY
Statutory regulations, technical standards, directives
The appliance must be installed in conformity with current statutory
regulations and in accordance with applicable safety standards.
Installing the oven
The unit in which the oven is installed must be manufactured to a
modular dimension of 600mm.
Openings at least 50 mm deep must be cut both in the bottom and in the
top of the unit to ensure adequate ventilation (see figure1 for essential
dimensions). During assembly, particular care must be taken not to pick
up the oven by the door. As a general rule, the oven door should never
be forced or subjected to undue stresses.
