Gorenje AIR 360L, Инструкция по использованию и установке

Страница: 8 / 134

1. STAND-BY
Under standby mode, only STAND-BY button works. By pressing the standby button,
the unit starts to work. The unit starts at LOW speed in NORMAL mode, with the LED
indicators showing accordingly. The unit starts without timer and swing function. The
unit will turn to
STAND-BY mode by pressing this button, with a prolonged sound
under working status.

Body sensor starts at the first power on under STAND BY mode. When starting
the unit again without power off, the fan will work in the same status before shut
down. (Besides the timer and wind modes).
(Body sensor is only available for some models)
2. FAN SPEED
By pressing FAN SPEED button when the unit is working, users can set wind speed
in “
LOW - MED - HIGH
”, and circulates like this. The indicators on the display will
display accordingly.
3. TIMER
The unit starts with no timer active. Users can set the timer by pressing the timer
button as follows: Off, 1h, 2h, 4h, 8h . The light indicators on the display circulate
accordingly with the selection. The fan will work in count-down mode and will shut
down when the timer expires.
4. HORIZONTAL OSCILLATION/ BODY SENSOR
When under working status, press this button to set horizontal oscillation angles as
follows: 0
°
,
60°
，
90°
,
180°
,
360°
, body detecting. The light indicators on the display
show accordingly
.

BODY SENSOR (optional)
The fan will start working in 360 degree oscillation after the activation of the body
sensor and will set the minimum angle according to detected position of a user. You
will hear a sound indicator after every detection. The fan will go back to the starting
position after 360 degree oscillation and then turn to the direction where he detected
a user. The unit will choose the proper oscillation angle automatically in the
detection area.

If the unit doesn't detect a user, the unit will detect again with oscillating 360
degree to detect again.

If more users appeared after the angle was already chosen, users should press
the button to start the sensor detection again.