30
3. Remove the lid and the inner pot. Clean with detergent first, then rinse well with water and
wipe dry with a soft cloth.
4. Clean the internal side of the lid with water. The seal ring, block-proof cover, exhaust
valve core and float valve can be removed for washing. Correctly re-install them after washing
and then dry the internal side of lid with a cloth.
5. Wipe clean the cooker body with a cloth. Do not soak or immerse the cooker body in
water or spray water on it.
Troubleshooting
When the followings occurs, it may not necessarily be a cooker fault or error. Please carefully
check once before sending the appliance for repair.
S/N
Problem
Reason
Solution
Difficult to close the lid
Sealing ring not installed
properly.
Position the sealing ring
correctly.
The floater valve clamps the
push rod.
Lightly push the push rod.
Difficult to open the lid
Float valve in the popped-up
position.
Lightly press the float valve
with a chopstick.
There is pressure exists
inside the cooker.
Open the lid after the
pressure is completely
released.
Steam leaks from the
lid
Sealing ring installed
incorrectly.
Correctly install the sealing
ring.
Food residue attached to the
sealing ring.
Clean the sealing ring.
Sealing ring damaged.
Replace the sealing ring.
The lid is not closed correctly.
Close the lid correctly.
Steam leaks from float
valve
Food residue on the float valve
gasket.
Clean the float valve gasket.
Float valve gasket worn-out.
Replace the
float valve
gasket.
Float valve unable to
rise
Too little food and water in the
inner pot.
Add water and food
according to the recipe.
Steam leaks from the lid or
exhaust valve.
Send to the service centre for
repair.
