Gorenje 3838782325007, Инструкция по эксплуатации

Страница: 21 / 52

21
Slicing
■ Place the food to be sliced on the carriage
and gently push it against the stop plate.
■ Slowly slide the food to be sliced against the
turning blade.
After using the appliance
■ Set the slicing width to 0.
■ Slide the carriage towards the blade into the
end position and lock it with the slide switch
8 .
Notes:
■ Cut sausage and cheese first and bread
last. The appliance is then easier to clean.
■ For reasons of hygiene, the appliance and
the blade should be cleaned immediately after
slicing greasy food (e.g. meat, sausage,
cheese).
►
“Cleaning”
■ If required, clean the blade cover and the
blade scraper
►
“Cleaning”
Cleaning
The appliance requires no maintenance!
Thorough cleaning guarantees a long service
life.
Risk of electric shock!
Never immerse the appliance in water or place
under running water, and do not clean it in the
dishwasher.
Risk of injury from sharp blade!
Before cleaning the appliance, pull out the
mains plug and remove the blade. Do not hold
the blade by the cutting surface, but by the
blade attachment.
Caution!
■ Appliance surfaces may be damaged. Do
not use abrasive cleaning agents.
■ The appliance will not run without the blade
cover. After cleaning the blade, attach the
blade scraper and blade cover.
Cleaning the appliance
■ Wipe the appliance, blade cover, blade and
blade scraper with a damp cloth, and then dry
it. If required, use a little detergent.
■ The blade scraper, “sausage end” holder
and serving tray are dishwasher-proof. Do not
wedge them in the dishwasher as they could
warp.
Removing the blade cover, blade
and
“sausage end” holder
■ Slide back the carriage until the blade is
accessible.
►
Fig. 13, 14
■ Release the blade cover (press at top right)
and remove.
►
Fig. 15
■ 1. Rotate the blade attachment all the way in
the clockwise direction.
2. Carefully remove the blade.
►
Fig. 16
■ Carefully detach the blade scraper (bottom
end first) and remove it.
Attaching the blade cover, blade
and
“sausage end” holder
►
Fig. 17
■ Press the blade scraper into position
(bottom end first).
►
Fig. 18
■ Hold the blade vertically on the blade
attachment and rotate it as far as possible in
the anti-clockwise direction (it has to
“click”
into position).
►
Fig. 19
■ Insert the blade cover at the bottom end first
and press it into position (do not press at top
right).
Removing/inserting the carriage
►
Fig. 20
■ Set the rotary knob to
.
■ Remove the carriage from the base.
■ Insert by sliding the carriage along the guide
in the base.
Storage
Risk of injury from sharp blade!
Keep the appliance out of reach of children.
■ Set the rotary knob
1 to 0.
■ Lock the carriage with the slide switch
8
(slide switch on the left).
■ Stow the cord
12 .
Attaching the appliance to the
countertop
The appliance can be attached securely to a
kitchen cabinet or countertop (e.g. a fold-away
counter).