Gorenje 3838782325007, Инструкция по эксплуатации

Страница: 20 / 52

20
Risk of electric shock!
Never immerse the appliance in water
orplace under running water and do
not clean in the dishwasher.
Do not use the appliance near a sink
filled with water !
Caution
Motor may overheat! After a maximum
10 minutes of continuous use,switch
OFF the appliance and allow to cool
down.
Noise level: Lc < 68 dB(A)
Overview
Please check the illustrated pages.
1 Rotary knob and stop plate
Set slicing width (0 to 15 mm).
2 Switch-on safety device
Press before switching on. Prevents the
appliance from being unintentionally switched
on.
3 ON button
a
Momentary switch
b Continuous operation
5 Blade
6 Blade cover
7 Carriage
Guides the food which is to be sliced
against the blade.
8 Slide
Pos. 1
(slide switch on the left)
= Lock the carriage in the end position
Pos. 2 (slide switch on the right)
= Carriage movable
9 Base
Supports the carriage.
10
“Sausage end” holder
Cuts residual pieces safely.
11 Serving tray
Catch and serve sliced food.
12 Cord storage
Store the cord in the cord storage
compartment.
Operation
Before using the appliance for the first time,
clean it thoroughly.
Preparation
Risk of electric shock!
Do not use the appliance near a sink filled with
water!
■ Place the appliance on a smooth, clean
surface.
■
Pull out the power cord.
Cord storage:pull out the cord to the required
length.
■ Attach the carriage
7 and the
“sausage end”
holder 10 .
■ Use the rotary knob
1 to set the required
cutting width (0 to 15 mm). In the lower
adjustment range, a very narrow slicing
width can be set (e.g. for salami, ham).
■ If required, insert/pull out the serving tray
11 .
■ Insert the plug into an electrical outlet.
Switching the appliance ON/OFF
Risk of injury from sharp blade!
The blade is very sharp. Keep hands clear of
the blade. After switching off, the drive
continues to turn for a short time. After use,
set the cutting width to 0.
Momentary switch operation
■ 1. Press the switch-on safety device and
hold it down.
2. Then, press the ON button and hold it until
the appliance starts running.
3. Release the switch-on safety device.
■ To stop the appliance, release the ON
button.
Continuous operation
■ 1. Press the switch-on safety device and
hold it down.
2. Then, press the ON button until the
appliance starts running.
3. Release the switch-on safety device and
the ON button.
■ To stop the appliance, press the ON button
and release it.