AirRing
4
•
Step 3: Insert the other end of that same hose into the AirRing’s valve and turn on the pump.
•
IMPORTANT: when operating the pump, do not obstruct or cover it. The vents on either side
must not face down. Doing so can damage the motor.
•
Step 4: Once the product is fully inflated, turn off the pump and remove the hose from the
valve.
•
Step 5: Promptly re-‐place the tabs on the valves, turning them slightly to tighten.
USING THE AIRRING
•
This product can (1) act as a jump surface when placed on its side, (2) act as a wheel when
placed upright, or (3) with one ring slightly deflated, users sit on the jump surface and tip the
weight back and forth to all sides.
•
(1) As a jump surface: ensuring the product is correctly inflated and surrounded by soft ground,
users stand and jump in the center of the trampoline surface. Maximum 4 users at a time.
•
(2) As a wheel: put their feet and hands thru each one of four handles on 4 corners of the inside
ring.
•
Users hold on tightly, as the AirRing is lightly pushed, spinning the user inside it in a wheel-‐like
motion
•
Important: When the AirRing is acting as wheel, use in a safe place and far from any hazards
including, but not limited, to: rocks, hills, slopes, traffic, streets, sidewalks, trees and in-‐ground
swimming pools.
•
(3) Place the AirRing on its side. Slightly deflate the upper ring, creating some instability in the
play surface.
•
Users move around in all directions to tip the weight on the AirRing.
•
The safety guidelines in this manual must be followed.
•
Discontinue use if an unsafe situation arises, whether it be in the use (see Safety Information) or
in the condition of the product (see Before Using). Do not allow use until the issues are
corrected.
“Inflate” side (see writing on right side)
Hose attaches to pump here
Hold nozzle inside the valve
