AirRing
3
ASSEMBLY AND INFLATION
•
Remove outer bag from the AirRing. Fold and store the bag someplace that will not be in the
way.
•
The AirRing Large weighs 69 lbs. If needed get help for carrying or setting up. (AirRing Small
weighs 34 lbs).
•
Loosen the straps and unfold the AirRing.
•
Unfold and set up the product on a flat, level, non-‐abrasive surface.
•
The AirRing has 2 valves: one in each ring. Locate and insert the pump into each. Normal
inflation time is approximately 3 to 5 minutes.
•
Close each valve.
•
Do not over-‐inflate, especially in hot weather. This will cause the air to expand and potentially
damage the product, resulting in a voided warranty.
•
Do not use high-‐pressure pumps or air compressors to inflate this product. Limit = 3.5 psi
INFLATING THE AIRRING
•
Step 1: Open the tabs off the tops of the valves. Push the plunger in and turn it either way to
keep it open.
•
NOTE: Inflating the piece without opening the valve puts unnecessary pressure on the pump.
•
Step 2: Fasten the yellow hose to the correct side of the pump. Align the black plastic end of the
hose with the button on the pump casing and turn to ensure a tight fit.
Exposed valve
