GoPowerBike GoExpress, Руководство пользователя

Страница: 33 / 50

29
1. Turn on/off the headlight and taillight if needed or desired. Once the LCD display is on, hold down the top (up arrow)
(located on the LCD display Remote) for approximately 2-3 seconds until the lights illuminate.
2.
3.
4.
4)
Select the desired level of pedal assistance (PAS) between level 0 through 5 using the up and down arrows on the display
remote. Level 1 corresponds to the lowest level of pedal assistance, and level 5 corresponds to the highest level of pedal
assistance. Level 0 indicates pedal assistance is inactive. Start in PAS level 0 or 1 and adjust from there.
5)
Begin riding carefully. With the proper safety gear and rider knowledge, Press the red button and you may now operate
your bike from GoPowerbike. On a flat surface, in a low gear (1 or 2), most riders should be able to begin pedaling the
bike with pedal assist level 0 or 1. You may also use the throttle to accelerate and maintain your desired speed.
6)
The throttle is used by slowly and carefully rotating the throttle backward, toward the rider. Do not use the
throttle unless you are on the bike.
Do not use the throttle while dismounted. Avoid accidental application of the throttle while dismounted; anytime
you are moving the bike while dismounted, ensure the bike is powered off to prevent accidental application of the
throttle.
NOTICE: Please note that it is normal to hear a squeaky noise from the breaks the first 40 to 60 miles (the brake pads are still new
and some rubbing against the rotor may occur