GoPowerBike GoExpress, Руководство пользователя

Страница: 29 / 50

25
LCD Display Operations
Operation Directions
Turn on bike Press and hold M button until power engages
Turn on headlight, taillight, Press and hold up arrow until light illuminates
Activate brake light When bike is on, squeeze brake lever
Increase pedal assist (PAS) level Press and release up arrow
Decrease pedal assist (PAS) level Press and release down arrow
Toggle odometer, trip odometer Press and release MODE (2)
Turn on walk mode While dismounted, press and continue to hold down arrow
Charge device using USB port Locate USB port on LCD edge closest to rider and unplug rubber cover.
With LCD powered off, plug USB charging cable (not included) into USB
port on LCD display and device (not included), and then turn on bike by
pressing and holding MODE until power engages.
Notice: .The USB Charging Port charges many, but not all, devices.
The USB charge rate from the display will supply power to many phones, but larger phones, which require higher power
in order to charge, may not register charging. If the display indicates “USB” it will supplement battery power for the
phone, but the state of charge of the phone may still decrease.