CHAPTER 3. TECHNICAL DESCRIPTION
GÖPEL electronic GmbH
Figure 3.6: TAP Matrix
3.5.5 Digital Out
The specifications of the four onboard Digital Out interfaces are described in chapter
3.6
Multi I/O Extension Board
The
G CAR 6282
Multibus Controller supports a total of four Digital Out interfaces
onboard
. These are firmly in-
stalled on the board. By attaching an I/O extension board, a total of 48 I/O interfaces are available (including the
four onboard Digital Out interfaces). The following table shows an overview of the interfaces of the I/O extension
board:
Table 3.15: Overview I/O interfaces of the extension board
Interface
Amount
Comment
Digital In
max. 16
Total max. 16 Digital In/ SENT Rx
SENT Rx
max. 2
Total max. 16 Digital In/ SENT Rx
Digital Out
max. 12
Total max. 12 Digital Out/ SENT Tx
SENT Tx
max. 4
Total max. 12 Digital Out/ SENT Tx
Analog In
max. 8
Analog Out
max. 8
The I/O extension board is also available as a
High Voltage
version up to 36 V. The digital outputs 1-4 and 13-16 still
have an output voltage of 5 V. The digital outputs 5-12 have an output voltage of up to 36 V and must be supplied
via UBAT_ADIO (see
Pin assignment matrix of the ODU connector
). The DAC must also be powered via UBAT_ADIO.
G CAR 6282
21
Содержание G CAR 6282
Страница 1: ...G CAR 6282 Manual Original documentation...