Goot RX-892AS, Руководство по эксплуатации

Страница: 25 / 36

TAIYO ELECTRIC IND.CO.,LTD.
TAIYO ELECTRIC IND.CO.,LTD. 25
4-12 How to Restore Default Settings
1
Key Operation TEMP Display
2
Press these the following keys
simultaneously for over 5 seconds,
while the preset temperature display is
shown.
All settings are restored to the factory
default.
By doing the procedure shown below, all the parameters will be restored to the default
settings set before the unit was shipped.
The key-lock function is also unlocked using this procedure. This can allow a third party
to alter the settings on the unit. Please keep this manual with authorized personnel only
and in a safe place for future reference.
How to Restore Default Settings
Setting completed
The preset temperature
is displayed.
Though the key lock can be released by doing the procedure shown above, the code
number cannot be reset.
To reset the code number, follow the procedure for "Resetting the Code Number"
shown on page 23.
When doing the "Resetting the Code Number" procedure, the alarm sounds until the tip
temperature falls below 250˚C. This is normal.
The initial temperature setting is 250˚C.
In this case, the temperature range for the alarm is at 250˚C plus/minus 50˚C.
During the resetting, the tip temperature is often out of this range.
That is why the alarm sounds for a short time.
Flashes 5 times
$
Returns to the set
temperature display.