Google YT1, Инструкция по безопасности и гарантии

Страница: 3 / 27

To avoid damaging your device, accessories or any connected devices, and to reduce the risk of personal
injury, discomfort, property damage or other potential hazards, follow these precautions below.
Your warranty is voided if you disassemble or attempt to disassemble the device.
Do not apply excessive pressure to the device to prevent damage (remove the device from your pants’
pocket or back pocket before sitting down).
Do not expose your device to open flames or lit tobacco products.
Do not attempt to disassemble your device. You may damage the device if you disassemble, drop, bend,
burn, crush, or puncture your device.
Do not use a device with cracked case. Using a damaged device may cause injury.
Do not expose your Titan Security Key to liquids, which can cause a short circuit and overheating. If your
device gets wet, do not attempt to dry it using an external heat source. Titan Security Key is designed to
work best in ambient temperatures between 32° to 95° F (0° and 35° C), and should be stored between
ambient temperatures of -4° and 113° F (-20° and 45° C).
Do not expose to temperatures above 113° F (45° C), as this may damage the product, or pose a risk
of fire.
Dispose of your device, according to local environmental regulations. Do not dispose of them in normal
household waste. Improper disposal may lead to fire, explosion, and/or other hazards.
Liquid has been spilled or an object has fallen into the product
The product has been exposed to water
The product has been damaged
The product does not operate normally when you follow the operating instructions
Damage requiring service
Titan Security Key should only be repaired by Google or a Google authorized service provider. Unauthorized
repairs or modifications could result in permanent damage to the device, and may affect your warranty
coverage and regulatory authorizations. Contact customer service for authorized service under the
following conditions.
•
•
•
•
•
•
•
•
•
•
•
Titan Security Key (YT1)
Basic safety
Please read before proceeding
Handling
Service & Support
WARNING: HEALTH AND SAFETY INFORMATION
Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043
Google, Google Cloud logo, and related marks and logos are trademarks of Google LLC.
Regulatory Information
FCC regulatory compliance
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. •
•
•
•
Changes or modifications not expressly approved by Google could void your authority to operate the
equipment or warranty.
EMC compliance
Important
This device and charging cable have demonstrated Electromagnetic Compatibility (EMC) compliance
under conditions that included the use of compliant peripheral devices and shielded cables between
system components. It is important that you use compliant peripheral devices and shielded cables between
system components to reduce the possibility of causing interference to radios, televisions, and other
electronic devices.
ISED Statement
This device complies with Innovation, Science and Economic Development Canada (ISED) license-exempt
RSS standard(s)
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation
of the device.
Waste Electrical and Electronic Equipment (WEEE) Directive
The WEEE symbol above means that according to local laws and regulations your product and its battery(ies)
should be disposed of separately from household waste. When this product reaches its end of life, take it to
a collection point designated by local authorities for safe disposal or recycling. The separate collection and
recycling of your product, and its electrical accessories will help conserve natural resources, protect human
health, and help the environment.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Model: YT1 (USB-C)
CAN ICES-3 (B)/NMB-3(B)