Google Nest Cam IQ outdoor, Руководство для профессионалов

Страница: 15 / 37

2019 | Confidential and Proprietary | Do not distribute
There are three different ways you can install the Nest Cam Indoor:
●
Place it on a horizontal surface like a shelf
●
Use the magnetic base to attach it to a metal surface
●
Install the metal plate to mount the camera on a wall or ceiling
Placing the camera on a horizontal surface
like a shelf, countertop, or table is easy. Place it where desired
and check the video stream on the Nest app.
NEST CAM INDOOR INSTALLATION
Attaching the camera to a metal surface
There’s a powerful rare earth magnet at the bottom of Nest Cam Indoor’s stand, so it will securely attach itself
to metal surfaces. You don’t need to drill holes or use the metal mounting plate to do this.
Simply attach Nest Cam Indoor to a refrigerator, a file cabinet, or other metal surface. We do not recommend
attaching the camera to a computer or electronics as this could potentially lead to damage.
Then check the camera’s video stream with the Nest app.
Installing the camera on a wall or ceiling with the mounting plate
●
Make sure the location they have picked is close enough to a wall outlet. Try holding the camera where they want
it with the power cable and adapter plugged in. You should have a little slack just in case.
●
Check Wi-Fi coverage on the Nest app. You may need to move it closer for a stronger signal, even if it’s just a few
inches.
●
Once video is confirmed, install the mounting plate. Hold the plate against the wall, ceiling, or other surface, and
screw it in. Make sure the cable clip points in the direction you want the cord to go. The screws are self-tapping,
so they’ll install easily in drywall, wood, and plaster without drilling a hole. If you need to drill into hard materials
like concrete or masonry, use wall anchors (not provided)
Important: If you need to drill holes, drill only
one to start with. Place the mounting plate on
the wall so that the hole you drilled lines up
with one of the slots on the plate. Drill the
other two holes using the slots as a guide.