06 Electrical Connection
User Manual V1.0-2022-11-01
20
Step 1:
Strip the insulation layer and insert the bared conductor into the terminal.
Step 2:
Crimp the Power cable.
Step 3:
Install the heat shrink tube.
Step 4:
Connecting the Power cable.
6.2.3 Connecting the Power Cable
WARNING
•
Connect the DC cables with the delivered terminals. The manufacturer shall not be liable
for the damage if other terminals are used.
•
Power off the battery system before connecting the power cable to avoid high voltage
danger.
•
The PE cable should be prepared by the customer.Type: outdoor PV cables satisfying the
inverter’s max input voltage.
6.2.4 Connecting the Communication Cable
NOTICE
•
Please refer to the following pin definitions if you need to make a new battery
communication cable.
Cooper,